12-
Getting started
Rejecting a call
When receiving a phone call:
or:
Ending a call
To stop the ringtone
When receiving a phone call you have the possibility to stop the ringtone.
Holding your mobile (while making or receiving a call)
The standby display (Main screen)
When switched On, the mobile searches for connection with the network. Once the
connection has been established, a beep sounds and the network and/or service
provider name or logo are displayed together with the time and date, the signal
strength and the battery charge level. If the mobile cannot find a valid network, the
signal strength and the operator name are not displayed.
On the main screen, the four arrows indicate that features can be accessed via
the four arrows on the cursor key.
The oval symbol in the middle of the cursor key indicates that the Camera ap-
plication (short press) and the Video application (long press) can be accessed by pressing the
OK key (in the middle of the cursor key).
and
i-mode
indicate that you can directly access the mailer and the i-mode service by
pressing the
softkeys.
The standby display (External screen)
The provider name as well as the time, the signal strength and the battery charge
levels are also displayed on the external screen when the mobile is activated.
On both screens,
indicates that your mobile is connected to a GPRS network.
1
Press the [On/Off] key or close the clamshell to reject the call (the call is then forwarded to
your mailbox).
1
Press and hold the [Camera/Video]
side key if the clamshell is closed.
1
Press the [On/Off] key.
You can also end a call by closing the clamshell. Please see "Active flip", page 88.
1
Press
No ring
if the clamshell is open or press the [Menu]
side key if the clamshell is
closed.
When using the hands free mode, do not put the phone to your ear.
How to hold
the phone.
Avoid
covering the up-
per back of the
phone to allow
maximum emis-
sion and
reception quality.
Содержание M430i
Страница 104: ...104 Notes NOTES MQ860P014A02 ...