11-
Getting started
GETTING STARTED
Preparing the phone for operation
Please refer to the Getting started with your M430i booklet.
Basic operations
Turning the phone On
If an image is set as a Welcome screen and/or a melody has been set as a Welcome melody, the
mobile first requests the PIN code then shows the selected image/animation and plays the selected
melody before showing the standby display (please see "Setting a still or animated image as a
standby display (for the Main screen or the External screen), as a Welcome screen or as a Goodbye
screen from the Pictures folder", page 59 and "Melodies", page 60).
Making a call
The phone can make and receive calls only when it is switched on, when a valid SIM card is
inserted and when it is connected to a GSM, DCS or PCS network service.
If the keypad is locked you can receive calls but you cannot make any (see "Keypad lock", page 13)
except emergency calls.
To make a call:
Whilst in conversation an
Options
list (
Speaker On
or
Speaker Off, AutoDTMF, Hold, Re-
trieve, Mute
or
Unmute, End call
and
Record)
and
Sp.on
(Speaker On)
/Sp.off
(Speaker Off,
after the speaker has been set to On)
is available from the Left and Right softkeys.
You can set the conversation volume by scrolling Up and Down
Answering a call
When receiving a phone call:
When a phone call is received the caller name, number (see "Receiving caller ID", page 92),
picture/video (see "Storing names and telephone numbers", page 33) may be displayed if you
created a Phone book card corresponding to this caller.
1
Open the clamshell.
2
Press and hold the [On/Off] key. A beep sounds at mobile activation. When switching the
mobile On for the first time or if the phone has been incorrectly switched off
may be dis-
played.
3
If your SIM card is PIN protected,
Enter PIN
is displayed.
Enter the PIN code and select
OK
.
4
If prompted, enter the date & time or select
Exit
if the information is correct.
Please refer to "Security Code: PIN codes", page 7 and to "Security features", page 94 for more details on
your PIN and lock codes.
If you set an application as a standby display for your mobile internal screen (see "Games & applications",
page 63), an information screen is displayed and proposes to display the Doja application.
1
Open the clamshell.
2
Dial the phone number or select one from your Phone book (press the [Left] arrow key or the
[Phone book] key from the standby display and select one of the available names).
3
Press the [Call/Send] key.
In compliance with European regulations, you are obliged to inform your correspondent before
recording a phone conversation.
1
Press the [Call/Send] key.
You can also answer a call by opening the clamshell. Please see "Active flip", page 88.
Содержание M430i
Страница 104: ...104 Notes NOTES MQ860P014A02 ...