Mitsubishi Electric LD77MH, Руководство пользователя

Страница: 73 / 238

2 - 25
Chapter 2 Input Axis Module
[Pr.325] Synchronous encoder axis smoothing time constant
Set the averaging time to execute a smoothing process for the input travel value from
synchronous encoder.
The smoothing process can moderate speed fluctuation of the synchronous encoder input.
The input response is delayed depending on the time corresponding to the setting by
smoothing process setting.
t
t
Input value speed
before smoothing
Input value speed
after smoothing
Averaging by
smoothing time constant
Pr.325 Synchronous encoder axis
smoothing time constant
Pr.325 Synchronous encoder axis
smoothing time constant
[Pr.326] Synchronous encoder axis phase compensation advance time
Set the time to advance or delay the phase (input response) of the synchronous encoder
axis.
Refer to Section 4.8 "Phase compensation function" for the peculiar time delay of the
system using the synchronous encoder axis.
1 to 2147483647 [ μ s] ............... Advance the phase (input response) according to the
setting time.
0 [ μ s] ........................................ Do not execute phase compensation.
-2147483648 to -1 [ μ s] ............ Delay the phase (input response) according to the setting
time.
If the setting time is too long, the system experiences overshoot or undershoot at
acceleration/deceleration of the input speed. In this case, set a longer time to affect the
phase compensation amount in "[Pr.327] Synchronous encoder axis phase compensation
time constant".