Mitsubishi Electric GT14, Руководство пользователя

Страница: 962 / 1546

40 - 20
40. CONNECTION TO CHINO CONTROLLER
40.5 Controller Side Setting
40.5.10 Connecting to KE3000

Key Lock setting
To write the Digital and the Analog parameters, set the
Key Lock setting.

Communication settings
Make the communication settings by operating the
switches SW2 and SW3 of the module.
(1) Setting by Switch (SW2)
*1 Adjust the settings with GOT settings.
*2 When the transmission code is MODBUS RTU, the setting of
the transmission character structure is fixed.
(2) Setting by Switch (SW3)
Set the station No. as follows.
*1 Select the station address without overlapping with that of
other units.
40.5.11 Connecting to LE5100,
LE5200, LE5300

Key Lock setting
To write the Digital and the Analog parameters, set the
Key Lock setting.

Communication settings
Set the communication settings with controller key
operation.
*1 Avoid duplication of the station No. with any of the other units.
*2 Adjust the settings with GOT settings.
Setting item Set value SW2-2 SW2-3
Transmission code
*2
MODBUS RTU OFF -
Transmission speed
*1
9600bps - OFF
19200bps - ON
Transmission character
structure
*2
8bits
Disable
1bit
(fixed)
- -
SW3-4 SW3-5 SW3-6 SW3-7 SW3-8
Station address
*1
OFF OFF OFF OFF OFF 1
ON OFF OFF OFF OFF 1
OFF ON OFF OFF OFF 2
ON ON OFF OFF OFF 3
:
:
ON OFF ON ON ON 29
OFF ON ON ON ON 30
ON ON ON ON ON 31
Printed wiring board
in main body
Front panel
SW3 SW2
Item Set value
RTU/ASCII RTU
Station address
*1 1 to 99
Transmission speed
*2
9600bps, 19200bps
Character
*2
(Bit length, Parity bit, Stop bit)
[8N1]: 8bits, None, 1bit
[8N2]: 8bits, None, 2bits
[8E1]: 8bits, Even, 1bit
[8E2]: 8bits, Even, 2bits
[8O1]: 8bits, Odd, 1bit
[8O2]: 8bits, Odd, 2bits