Mitsubishi Electric GT14, Руководство пользователя

Страница: 1194 / 1546

51 - 26
51. CONNECTION TO YOKOGAWA TEMPERATURE CONTROLLER
51.5 Temperature Controller Side Setting
(2) Communication mode settings
Make this setting by operating the communication
mode select DIP SW.
(3) A setting of the station No.
Make this setting by operating the station No. select
Rotary switch.
51.5.4 Connecting to UTAdvanced
Series

Communication settings
Make the communication settings by operating the key
of the temperature controller.
*1 Adjust the settings with GOT settings.
*2 Avoid duplication of the address with any of the other units.
51.5.5 Connecting to converter (ML2-

)

Communication settings
Make the communication settings using a setting switch.
*1 Adjust the settings with GOT settings.
*2 Refer to the following connection diagram for setting.
51.3.2 RS-485 cable

Settings by switch
(1) Settings of the setting (2-wire/4-wire), the RS-485
driver-active control, the terminating resistor, the
echo back
Make those settings by operating the communication
setting DIP SW.
(2) A setting of the transmission speed
Make this setting by operating the timer change-over
time Rotary switch.
Switch position Communication mode
ON PC link communication mode
Switch position Station No.
0 1
1 2
2 3
3 4
4 5
5 6
6 7
7 8
8 9
9 10
A 11
B 12
C 13
D 14
E 15
F 16
Item Set value
Transmission
speed
*1
9600bps, 19200bps, 38400bps
Data bit
*1
7bits, 8bits
Parity bit
*1
Even, Odd, None
Stop bit
*1
1bit, 2bits
Address
*1*2 1 to 99
Minimum response
time
0 to 10 (×10 ms)
Protocol
selection
*1
PCL(0): PC link communication (without sum check)
PCLSM(1): PC link communication (with sum check)
Item Set value
Transmission speed
*1
9600bps, 19200bps, 38400bps
Setting (2-wire/4-wire)
*2
2-wire type or 4-wire type
Terminating resistor
*2
Done, None
Echo back OFF
RS-485 driver-active control AUTO
Setting item Set value
Switch No.
1 2 3 4 5 6
Setting (2-wire/4-wire)
4-wire type OFF OFF
-
2-wire ON ON
RS-485 driver-active
control
AUTO OFF
terminating resister
With ON
Without OFF
Echo back OFF OFF
Switch position Transmission speed
5 9600bps
6 19200bps
7 38400bps
Timer change-over time
Rotary switch
Communication setting
DIP SW