Mitsubishi Electric GT14, Руководство пользователя

Страница: 1441 / 1546

56
CONNECTION T
O
L
S
IN
DUST
R
IA
L
SY
STEMS PLC
57
CONNECTION T
O
SI
CK SAFE
T
Y
CONTROL
LER
58
CONNE
C
T
ION T
O
SI
EME
N
S PLC
59
CON
N
ECT
ION
T
O
HI
RA
TA
C
O
RPOR
AT
ION
HN
C C
O
NT
ROL
LE
R
60
CONNECTION
T
O
MURA
TEC
CONT
ROLLE
R
61
MICROCOMPUTER C
O
NNECTION
(SERI
A
L)
62
MICROCOMPUTER CONNECTION (ETHERNET)
63
MODBUS
(R)/
R
T
U
CONNECTION
61. MICROCOMPUTER CONNECTION (SERIAL)
61.6 GOT Side Settings
61 - 67
61.6 GOT Side Settings
61.6.1 Setting communication interface
(Communication settings)
Set the channel of the equipment connected to the GOT.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: Other
• Controller Type: Computer
• I/F: Interface to be used
• Driver:Computer
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
61.6.2 Communication detail settings
Click the button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
18.1.2 I/F communication setting
61.6.2 Communication detail settings
Make the settings according to the usage environment.
2.
3.
4.
Click!
OK
Item Description Range
Transmission
Speed
Set this item when change the
transmission speed used for
communication with the connected
equipment.
(Default: 19200bps)
4800bps,
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
Data Bit
Set this item when change the data length
used for communication with the
connected equipment.
(Default: 7bit)
7bit/8bit
Stop Bit
Specify the stop bit length for
communications.
(Default: 1bit)
1bit/2bits
Parity
Specify whether or not to perform a parity
check, and how it is performed during
communication.
(Default: Even)
None
Even
Odd
Host Address
Specify the host address (station No. of
the PLC to which the GOT is connected)
in the network of the GOT.
(Default: 0)
0 to 31
Format
Select the communication format.
(Default: 1)
1 to 15
Interrupt
Data Byte
Specify the number of bytes of interrupt
data.
(Default: 1byte) 1byte,
2byte,
4byte
Special
Interrupt
Code
Output
Set whether or not to output the special
interrupt code.
(Default: No)
Yes or No
Control
Method
Set this item when selecting the XON/
XOFF control for the control method.
(Default: No)
XON/XOFF,
No
32bit Storage
Select the steps to store two words (32-bit
data).
(Default: LH Order)
LH Order/
HL Order