Mitsubishi Electric GT14, Руководство пользователя, Страница: 494 / 1546

23 - 44
23. ETHERNET CONNECTION
23.4 PLC Side Setting
(2) Operational settings
: Necessary : As necessary : Not necessary
*1 Because port No. 5551 is fixed, these items operate at the
following setting without relations to the setting given here.
• Communication date code: [Binary code]
• Initial timing setting: [Always wait for OPEN]
(Communication is available while the programmable
controller CPU stops.)
POINT POINT POINT
When changing Ethernet parameter
After writing the Ethernet parameter to the PLC CPU,
turn off and then on, or reset the PLC CPU.
(3) Open settings
POINT POINT POINT
When connecting to multiple GOTs and peripheral
devices
The number of protocols equivalent to that of the GOTs
and devices must be set.
Item Set value
Setting necessity at
GOT connection
Communication data
code
*1
(Use default value)
IP address 192.168.0.19
Initial timing
*1
(Use default value)
Send frame setting
TCP Existence
confirmation setting
Item Set value
Setting necessity at
GOT connection
Protocol TCP
Open system MELSOFT connection
Fixed buffer
(Use default value)
Fixed buffer
communication procedure
Pairing open
Existence check
Host station Port No.
(DEC.)
Transmission target device
IP address
Transmission target device
Port No. (DEC.)