43
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ENGLISH
♦
PRE ALARM REC
This item is used to set the pre-alarm recording.
4
1
2
3
<RECORD SETTING>
NO PPS GRADE A-PPS A-GRADE
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
ALARM TYPE ALARM CH
>>PRE ALARM REC OFF
CLEAR:BACK
<ESTD REC> D H M
Setting (default: “OFF”)
“OFF,” “SHORT,” “MEDIUM,” “LONG”
For the pre-alarm recording time,
see “Pre-
alarm recording time table” on pages 79 and 80.
When you set “PRE ALARM REC” to the setting
item other than “OFF,” normal recording cannot be
performed. Set “PRE ALARM REC” to “OFF” to
perform normal recording or alarm recording.
When you set “PRE ALARM REC” to the setting
item other than “OFF,” it is recommended not to
change the settings in “ALARM REC DURATION”
and <RECORD SETTING>. If you change these
settings, the recording may be performed in the
previous settings depending on the timing of the
recording. When you want to change the settings in
“ALARM REC DURATION” and <RECORD
SETTING> while setting the “PRE ALARM REC” to
the item other than “OFF,” set “PRE ALARM REC”
to “OFF” first.
1. Press the SET UP button
}
<SETTINGS>
}
Select
“RECORD SETTING” in the <RECORD SETTINGS> screen
and then press the ENTER button.
• The <RECORD SETTING> screen appears.
2. Press the JOG , buttons to move the cursor to “PRE
ALARM REC” and then press the ENTER button.
• The background of the setting item turns red and flashes.
3. Display the desired item and then press the ENTER button.
• The setting item is determined and flashing stops.
4. Press the CLEAR button or the SET UP button.
■
ALARM REC DURATION
This item is used to set the recording time period for alarm
recording.
<RECORD SETTINGS>
ALARM SETTING
RECORD SETTING
>>ALARM REC DURATION 5S
Setting (default: “5S”)
“2S,” “5S,” “10S,” “15S,” “30S,” “45S,” “1M,” “2M,”
“5M,” “10M,” “20M,” “30M,” “60M,” “MANUAL”
“MANUAL”: Continues alarm recording until the
ALARM IN terminal is ungrounded.
1. Press the SET UP button
}
<SETTINGS>
}
Select
“ALARM REC DURATION” in the <RECORD SETTINGS>
screen. Display the desired setting and determine such setting.
2. Press the CLEAR button or the SET UP button.
When the alarm list tends to increase, it is
recommended to set ALARM REC DURATION to
“5S” or more.
