manualshive.com logo in svg

Mitel MiVOICE BUSINESS, Инструкция по инженерии

Mitel MiVOICE BUSINESS - это инновационное решение для бизнеса, предоставляющее высококачественную связь и управление. Вам доступен расширенный Installation Manual, который можно бесплатно скачать с нашего manualshive.com. Воспользуйтесь этим руководством, чтобы максимально эффективно использовать все возможности продукта.

Поделиться
Скачать
background image

Network Configuration Concepts

217

The IP devices connected to the port examples above are

•

Ports 1 though 4: Dual-port phones with PCs.

•

Port 5: Interconnected network switches (only tagged data allowed within network).

•

Port 6: Not used with this application. Untagged data on this link goes to VLAN4 only.

•

Port 7: 3300 ICP controller, or similar voice applications such as a Mitel Speech Server 
(formerly Speak@Ease).

•

Ports 8 and 9: PCs.

•

Port 10: Router with virtual ports (similar to a connection between switches).

•

Port 11: Router port that physically separates VLANs (the data VLAN).

•

Port 12: Router port that physically separates VLANs (the voice VLAN).

More details on configuring different HP network switches can be found in 

HP ProCurve 

Networking IP Telephony Solution Design Guide

 and 

HP ProCurve Networking IP Telephony 

Solution Implementation Guide

 on Mitel OnLine.

Refer to http://www.hp.com/rnd/solutions/convergence.htm for examples of how to set up HP 
switches in a VoIP environment.

WAN LAYER 3 PRIORITY

A number of different WAN technologies provide data routing with different priorities and Service 
Level Agreements (SLA). Most of these deal with the WAN technology, but most rely on 
information being presented in the Layer 3 Type-of-Service (TOS) field.

The Type-of-Service field has undergone some name and function changes. This field is now 
also known as Differentiated Services Code Point (DSCP) or DiffServ. The DiffServ uses the 
precedence and some of the TOS bits (TOS instead of Type of Service field) to provide 64 
different service levels. See Figure 30 on page 213 for the location of the Type-of-Service field. 
Voice will typically be sent in the Expedited Forwarding (EF) queue which is represented by a 
DSCP value of 46.

The DSCP value is programmed using DHCP server option (see “DHCP Option 
Reclassification” on page 245). This is picked up by the IP phones. The default Mitel values for 
DSCP was previously fixed at 44 to allow backward compatibility with older TOS based routers. 
However, today, 46 is the expected value to be used. A DSCP value of 44 will still be directed 
to a high priority queue, but 46 is handled in a more “Expedited” manner. It is recommended 
that to provide for product at different levels routers (default gateways) map DSCP44 to 
DSCP46. The alternative is to map DSCP44 to the EF queue, but then this needs to be 
programmed in all routers. Note that the DSCP value can still be programmed to 44 to maintain 
backward compatibility. Current releases of software (MCD 4.0 upwards) use a default DSCP 
value of 46, while the older IP sets and software may also use a default DSCP value of 44. An 
example of programming needed for a router is given in the appendix (see page 312 and 
page 315).

Note: 

Using VLAN 0 with HP is not recommended. However, it is possible to extend 

VLAN numbering up to a maximum of 4093.

Содержание MiVOICE BUSINESS






























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MiVOICE BUSINESS

Eaton PXM4K Series User Manual preview
PXM4K Series
Бренд: Eaton Страницы: 44
Icemobile TWISTER User Manual preview
TWISTER
Бренд: Icemobile Страницы: 75
Icemobile ACQUA User Manual preview
ACQUA
Бренд: Icemobile Страницы: 36
Palm Pixi Plus Get Started preview
Pixi Plus
Бренд: Palm Страницы: 28
Palm 700wx - Treo Smartphone 60 MB Quick Start Manual preview
700wx - Treo Smartphone 60 MB
Бренд: Palm Страницы: 2
Palm 700wx - Treo Smartphone 60 MB Setting Up preview
700wx - Treo Smartphone 60 MB
Бренд: Palm Страницы: 30
Palm 700w - Treo Smartphone 60 MB Addendum preview
700w - Treo Smartphone 60 MB
Бренд: Palm Страницы: 14
YAKOYA M95 User Manual preview
M95
Бренд: YAKOYA Страницы: 62
O2 Xda Flame User Manual preview
Xda Flame
Бренд: O2 Страницы: 36
i-mobile i-Style 8.1 User Manual preview
i-Style 8.1
Бренд: i-mobile Страницы: 58
Catchwell CW30 User Manual preview
CW30
Бренд: Catchwell Страницы: 101
Alcatel 2057 Series User Manual preview
2057 Series
Бренд: Alcatel Страницы: 27
ICON VoiceFriend Quick Start Manual preview
VoiceFriend
Бренд: ICON Страницы: 6
Snapper 8915 - Snapper Cell Phone User Manual preview
8915 - Snapper Cell Phone
Бренд: Snapper Страницы: 66
HTC EXODUS 1s User Manual preview
EXODUS 1s
Бренд: HTC Страницы: 139
M4 SS4452 Quick Start Manual preview
SS4452
Бренд: M4 Страницы: 19
Sony Ericsson W350 Quick Start Manual preview
W350
Бренд: Sony Ericsson Страницы: 2
Barco ClickShare CX-20 Gen2 User Manual preview
ClickShare CX-20 Gen2
Бренд: Barco Страницы: 66

Бренды по названию

Популярные бренды

Загрузить еще бренды