manualshive.com logo in svg

Mitel MiVOICE BUSINESS, Инструкция по инженерии

Mitel MiVOICE BUSINESS - это инновационное решение для бизнеса, предоставляющее высококачественную связь и управление. Вам доступен расширенный Installation Manual, который можно бесплатно скачать с нашего manualshive.com. Воспользуйтесь этим руководством, чтобы максимально эффективно использовать все возможности продукта.

Поделиться
Скачать
background image

Engineering Guidelines

240

The sequence above assumes that the phones get information from a DHCP server. The 
information can also be manually entered into a phone as it starts to boot up, to make sure the 
information is fixed and requires little DHCP intervention. This method is particularly useful if 
a phone is used on a remote WAN link and the router cannot forward DHCP requests, or if a 
local DHCP server does not exist. It is also useful on VPNs, for the same reasons.

LLDP-MED AND IP PHONE NETWORK POLICY

Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) is based on 
VoIP-specific extensions to the IEEE 802.1AB LLDP standard. LLDP is the IEEE neighbor 
discovery protocol and allows information to be gathered from network devices such as switches 
and wireless access points. The information gathered with LLDP, aids in troubleshooting and 
provides data to management systems so that management systems can create accurate views 
of the network’s topology.

LLDP-MED allows for information sharing between VoIP endpoints such as IP phones and 
network devices such as L2 Ethernet switches.

LLDP-MED can be used to simplify the deployment of IP phones with auto-discovery. This 
means that IP phones can auto-discover network policy from an LLDP-MED compliant L2 switch 
to obtain the following network policy information:

•

VLAN (802.1.Q) information

•

COS L2 Priority (802.1p) information

•

DSCP (L3 Priority) information.

Notes Regarding LLDP-MED

Network loading

Traffic from LLDP-MED packets will not cause network loading problems since LLDP-MED 
packets are not forwarded by L2 switches. The packets are sent from the phone to the L2 switch 
and vice versa and since these packets are not forwarded by L2 switches, the packets remain 
only on this LAN segment.

Simplifying IP Phone deployment

LLDP-MED can be used in conjunction with DHCP options to provide the phone with network 
policy information. Using LLDP-MED can remove the requirement to program the DHCP server 
with VLAN, L2 COS priority, and DSCP priority information. LLDP-MED can also remove the 
need to enable DHCP forwarding in the general routing infrastructure.

LLDP-MED and using scopes

In many situations, especially where part of the network uses different LAN policy from other 
parts, use of LLDP-MED may simplify network configuration. The appropriate LAN policy values 
can be applied directly to the L2 switching gear in each section of the LAN separately, rather 

Note: 

Some DHCP interaction is still required to provide IP Phones with the IP address 

of the ICP and TFTP server. In cases where DHCP servers are being used, DHCP 
forwarding (IP Helper) will still need to be enabled on routers, however, with LLDP-MED 
used to provide LAN policy (VLAN in particular) this will only be needed in the voice 
VLAN.

Содержание MiVOICE BUSINESS






























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MiVOICE BUSINESS

ZTE-G R237m User Manual preview
R237m
Бренд: ZTE-G Страницы: 51
Parker 2003-CB-00 Technical Manual preview
2003-CB-00
Бренд: Parker Страницы: 47
Fysic FM-7810 Quick Start Manual preview
FM-7810
Бренд: Fysic Страницы: 8
Snapfon ezTWO-A Quick Start Manual preview
ezTWO-A
Бренд: Snapfon Страницы: 9
Sprint PCS CDM9155SP Getting To Know Manual preview
CDM9155SP
Бренд: Sprint PCS Страницы: 145
Sony Ericsson W760c Manual preview
W760c
Бренд: Sony Ericsson Страницы: 40
HTC TyTN User Manual preview
TyTN
Бренд: HTC Страницы: 204
Mocet IP3093-L Quick Start Manual preview
IP3093-L
Бренд: Mocet Страницы: 13
Blackberry T Mobile Z10 LTE User Manual preview
T Mobile Z10 LTE
Бренд: Blackberry Страницы: 22
Audiovox CDM 4500 Operation Manual preview
CDM 4500
Бренд: Audiovox Страницы: 49
Samsung SM-A715FZSGTGY User Manual preview
SM-A715FZSGTGY
Бренд: Samsung Страницы: 142
Lucent Technologies MERLIN LEGEND Release 6.0 Pocket Reference preview
MERLIN LEGEND Release 6.0
Бренд: Lucent Technologies Страницы: 160
Nokia 6101 - Cell Phone 4.4 MB User Manual preview
6101 - Cell Phone 4.4 MB
Бренд: Nokia Страницы: 169
Nokia 3205 - Cell Phone - CDMA2000 1X Service Manual preview
3205 - Cell Phone - CDMA2000 1X
Бренд: Nokia Страницы: 5
Nokia 3208c User Manual preview
3208c
Бренд: Nokia Страницы: 60
Nokia 3210 User Manual preview
3210
Бренд: Nokia Страницы: 82
Nokia 3205i User Manual preview
3205i
Бренд: Nokia Страницы: 109
Nokia 3220 - Cell Phone - GSM User Manual preview
3220 - Cell Phone - GSM
Бренд: Nokia Страницы: 131

Бренды по названию

Популярные бренды

Загрузить еще бренды