manualshive.com logo in svg

Mitel MiVOICE BUSINESS, Инструкция по инженерии

Mitel MiVOICE BUSINESS - это инновационное решение для бизнеса, предоставляющее высококачественную связь и управление. Вам доступен расширенный Installation Manual, который можно бесплатно скачать с нашего manualshive.com. Воспользуйтесь этим руководством, чтобы максимально эффективно использовать все возможности продукта.

Поделиться
Скачать
background image

Engineering Guidelines

140

CLUSTERING

Clustering and networking between units introduces additional performance overhead and 
limitations on the individual 3300 ICPs and MiVoice Business systems, but allows a much 
greater overall system to be deployed, over potentially a large geographic area. To determine 
the impact of such configurations and use with users and applications, it is highly recommended 
to use the System Engineering Tool to gauge the headroom and overall impact of such 
configurations.

Within the System Engineering Tool a number of system configurations are highlighted. These 
are described in detail within the instructions associated with the System Engineering Tool, but 
are described briefly here:

•

Standalone: 

An individual unit that is not connected by any form of networking, for example, 

a small or medium-sized business.

•

Networked: 

A number of locations that are interconnected, but the level of inter-office traffic 

is not particularly high, for example, a business with multiple corporate offices in different 
cities.

•

Clustered (with PSTN trunk sharing):

 A number of systems that interoperate to create a 

bigger system; for example, a larger office where there are a number of trunk connections 
to the PSTN, but where the PSTN can present a call to any of the trunks. An incoming call 
could arrive on any system, and likewise on outgoing call could also go through any system.

•

Clustered (without PSTN trunk sharing):

 A business that is connected using a MAN 

(perhaps dispersed across a city) where each office is connected to the PSTN through local 
trunks, but where internal traffic can flow freely from office to office. Examples include a 
campus environment, a large department chain, or a government establishment.

•

User Controller: 

This is a 3300ICP or MiVoice Business system that only deals with IP 

Phones and users. It does not have direct connectivity to TDM PSTN trunks, although it 
will have access to IP-Trunks to other MiVoice Business systems and 3300ICPs. A user 
controller connected via SIP trunks could also be modeled by a standalone configuration.

•

Trunking Gateway PSTN/TDM: 

This is a 3300ICP that is primarily a tandem controller that 

interfaces IP-Trunks to PSTN/TDM trunks, or analogue phones. Typically such a unit will 
not have associated IP users, but it may have associated applications for call handling or 
queuing, for example with call centres.

•

Trunking gateway PSTN/SIP: 

This is a 3300ICP or MiVoice Business system that is pri-

marily a tandem controller that interfaces between internal IP-Trunks and external SIP 
trunks. Typically such a unit will not have associated users, but it may have associated 
application for call handling or queuing, for example with call centres. 

Содержание MiVOICE BUSINESS






























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MiVOICE BUSINESS

QMobile Q8 User Manual preview
Q8
Бренд: QMobile Страницы: 66
Biamp TesiraFORTÉ AVB VT4 System Design Manual preview
TesiraFORTÉ AVB VT4
Бренд: Biamp Страницы: 2
O2 X4 How To Use Manual preview
X4
Бренд: O2 Страницы: 118
WM Systems M2M Easy2s Installation Manual preview
M2M Easy2s
Бренд: WM Systems Страницы: 102
Triadis TR-DVS 251 Manual preview
TR-DVS 251
Бренд: Triadis Страницы: 4
Polycom RealPresence Digital Brkout User Manual preview
RealPresence Digital Brkout
Бренд: Polycom Страницы: 2
NEC KMP7N2K1 User Manual preview
KMP7N2K1
Бренд: NEC Страницы: 61
T-Mobile Revvlry+ User Manual preview
Revvlry+
Бренд: T-Mobile Страницы: 211
HTC H1915 Service Manual preview
H1915
Бренд: HTC Страницы: 36
Polycom RealPresence Group 700 system Installing preview
RealPresence Group 700 system
Бренд: Polycom Страницы: 2
Alcatel ONETOUCH POP 7S P330X Quick Start Manual preview
ONETOUCH POP 7S P330X
Бренд: Alcatel Страницы: 32
Alcatel A206G User Manual preview
A206G
Бренд: Alcatel Страницы: 51
myPhone Prime 5 User Manual preview
Prime 5
Бренд: myPhone Страницы: 2
Sony Ericsson T62u User Manual preview
T62u
Бренд: Sony Ericsson Страницы: 99
Sony Ericsson Z500a User Manual preview
Z500a
Бренд: Sony Ericsson Страницы: 102
Alcatel One Touch Spop 4030D User Manual preview
One Touch Spop 4030D
Бренд: Alcatel Страницы: 73
Docomo Digital Mova SO503iS HYPER Manual preview
Digital Mova SO503iS HYPER
Бренд: Docomo Страницы: 396
Doppler Systems DDF7000 User Manual preview
DDF7000
Бренд: Doppler Systems Страницы: 64

Бренды по названию

Популярные бренды

Загрузить еще бренды