manualshive.com logo in svg

Mitel MiVOICE BUSINESS, Инструкция по инженерии

Mitel MiVOICE BUSINESS - это инновационное решение для бизнеса, предоставляющее высококачественную связь и управление. Вам доступен расширенный Installation Manual, который можно бесплатно скачать с нашего manualshive.com. Воспользуйтесь этим руководством, чтобы максимально эффективно использовать все возможности продукта.

Поделиться
Скачать
background image

Engineering Guidelines

158

A compression license is needed for every call that passes through a 
MiVoice Business/3300 ICP controller that requires a compression resource. Calls that 
typically require a MiVoice Business/3300 ICP compression resource are those that are 
associated with an IP trunk where the call traverses TDM to IP, or vice versa, and where 
there is a remote connection with limited bandwidth. The use of compression is defined 
through compression zone configuration and the zone with which the phone is associated. 
In the systems using dedicated MiVoice Business/3300 ICP hardware, additional DSP 
hardware must be added in order to enable compression. For MiVoice Business in 
commercial servers, compression resources are provided in software by the Media Server 
component (software blade). Compression licenses are available in increments of 8 
sessions. 

•

Fax over IP (T.38)

A T.38 license is required to allow an ICP to originate or terminate Faxes over IP or SIP 
trunks from TDM ports. A field called ‘Fax over IP (T.38) licenses” can be found under 
purchasable option. The Wizard will validate that the value input is a multiple of 4. Minimum 
value: 0, maximum value: 64 (recommended maximum 48). Enter the number of licenses 
purchased. Licenses can be purchased in groups of 4 up to a maximum of 64. A reboot is 
required to enable new licenses. This option is only available on dedicated 
MiVoice Business/3300 ICP hardware which can terminate FAX calls on TDM interfaces. 
It is not applicable to servers which cannot connect to TDM ports.

•

HTML Applications license

Each license allows you assign HTML applications to a device using the User and Device 
Configuration form in the System Administration Tool. Up to 5600 licenses are supported. 

•

X-NET Networking license 

In Release MCD 4.1 and earlier, an X-NET license is needed to enable a networking protocol 
session over a TDM trunk. One license is required for each controller-to-controller 
connection. As of Release MCD 5.0 this license is enabled by default in an “Enterprise” 
system, and disabled for “Standalone”.

•

IP Networking license 

In Release MCD 4.1 and earlier, an IP networking license is a system-wide license that 
allows access to all IP trunks on the system. An IP networking license is needed for every 
call that is handled between different controllers. As of Release MCD 5.0 this license is 
enabled by default in an “Enterprise” system, and disabled for “Standalone”. For more 
information on determining the number of licenses, see the section “Licensing Example” 
on page 165.

•

Voice Mail networking license 

In Release MCD 4.1 and earlier, a Voice Mail Networking license is needed to support 
networked/clustered Embedded Voice Mail, NuPoint, and other VPIMv2 compliant voice 

Note: 

FAX over IP support requires the DSP II card. You can purchase and configure 

licenses on the system before you install the required DSP II cards in the system. 
However, an alarm will be raised after you reboot the system if required DSP II cards 
are not installed.

Содержание MiVOICE BUSINESS






























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MiVOICE BUSINESS

Samsung SM-C105A User Manual preview
SM-C105A
Бренд: Samsung Страницы: 283
Allview C5 Smiley User Manual preview
C5 Smiley
Бренд: Allview Страницы: 142
i-onik i545 Quick Start Manual preview
i545
Бренд: i-onik Страницы: 5
Aquos Phone IS14SH User Manual preview
IS14SH
Бренд: Aquos Phone Страницы: 88
Pantech C630 User Manual preview
C630
Бренд: Pantech Страницы: 61
Yealink MVC940 Quick Start Manual preview
MVC940
Бренд: Yealink Страницы: 36
Blu DASH 4.0 User Manual preview
DASH 4.0
Бренд: Blu Страницы: 54
Pantech PG-1310V User Manual preview
PG-1310V
Бренд: Pantech Страницы: 77
DIS DDS 5900 User Manual preview
DDS 5900
Бренд: DIS Страницы: 54
myPhone Funky User Manual preview
Funky
Бренд: myPhone Страницы: 9
Samsung SM-G360M/DS User Manual preview
SM-G360M/DS
Бренд: Samsung Страницы: 100
Samsung SM-G360H/DS User Manual preview
SM-G360H/DS
Бренд: Samsung Страницы: 100
Samsung SM-G360FY/DS User Manual preview
SM-G360FY/DS
Бренд: Samsung Страницы: 95
Creator Electronics CR-WiFi6101 User Manual preview
CR-WiFi6101
Бренд: Creator Electronics Страницы: 20
Zte F158 User Manual preview
F158
Бренд: Zte Страницы: 91
Zte E821S User Manual preview
E821S
Бренд: Zte Страницы: 36
GENERAL MOBILE GM 20 User Manual preview
GM 20
Бренд: GENERAL MOBILE Страницы: 16
Lava KKT06 User Manual preview
KKT06
Бренд: Lava Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды