manualshive.com logo in svg

Mitel MiVOICE BUSINESS, Инструкция по инженерии

Mitel MiVOICE BUSINESS - это инновационное решение для бизнеса, предоставляющее высококачественную связь и управление. Вам доступен расширенный Installation Manual, который можно бесплатно скачать с нашего manualshive.com. Воспользуйтесь этим руководством, чтобы максимально эффективно использовать все возможности продукта.

Поделиться
Скачать
background image

Network Configuration Concepts

205

Some carriers may also offer an SLA that honours and provides queuing for incoming (download 
to the customer) data as well. There may be an additional charge, but this will provide the added 
queuing on the far end of the often bandwidth limited connection between the customer and 
the carrier. With the customer providing priority queuing on the outgoing (uplink from the 
customer), this link will then have priority queuing at both ends of the connection, to ensure 
priority for voice traffic. 

If a WAN connection provides both data and voice traffic on a common path, then priority 
schemes need to be employed. All IP phones and the 3300 ICP controller use appropriate 
Type-of-Service or DiffServ field settings. Priority queuing should be enabled on the end routers, 
even if priority is not used within a separate voice network. See the section “Network Priority 
Mechanisms” on page 212 for further details.

For more dedicated links, some additional protocols can be used to improve bandwidth usage. 
The data in an Ethernet LAN connection includes a data layer for Ethernet and a data layer for 
IP. In a WAN connection, the Ethernet layer is not needed. However, other layers are needed 
to transport the IP layer and voice data. As a result, certain WAN protocols can use less 
bandwidth. These include the more dedicated links such as PPP and compressed PPP.

TRANSCODING AND COMPRESSION

The terms “transcoding” and “compression” are often used interchangeably. Transcoding is the 
changing of voice information from one CODEC type to another. However, most CODEC 
devices rely on G.711 as the base entry level. Transcoding from G.729a to G.726 is likely done 
through G.711. Compression is simply reducing the amount of data. For voice traffic, this can 
be achieved by going from G.711 to G.729a, for example.

Any form of voice compression works by removing a certain amount of information deemed 
non-essential. This may include not sending data during silent periods, as well as sending only 
the main voice frequency elements rather than the full bandwidth. As a result, some information 
is lost. Compressed voice is never as good as uncompressed voice, but the required intelligibility 
is maintained. Of the compression CODECs, G.729a has good bandwidth reduction and 
maintains good voice quality and intelligibility.

In the LAN environment where bandwidth is plentiful, there is probably little reason to compress 
voice, and so G.711 is normally the CODEC of choice. In a WAN environment, where access 
bandwidth may be limited, use of the G.729a CODEC can increase the amount of voice traffic 
that can be carried on a particular link. In some instances, G.711 is still preferable for voice 
quality, but voice traffic will be limited on the link.

WIDEBAND VOICE 

The use of IP and the ability to use bandwidth values that are not directly linked to PSTN BRI 
channel limits, allows the use of new CODECs and features.

With Release MCD 5.0, a new wideband audio CODEC has been added to the system capability 
and is supported on the IP devices. The new CODEC implemented is G.722.1 and is based on 
ITU-T standards. It provides voice capability with a bandwidth of 50Hz to 7kHz, compared to 
300-3400Hz for a standard telephony channel.

Wideband audio is not supported over the analogue PSTN. The G.722.1 CODEC is also not 
easily supported over the digital PSTN (BRI, PRI) and could nominally be used only for point 

Содержание MiVOICE BUSINESS






























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MiVOICE BUSINESS

Samsung SM-G920I Quick Start Manual preview
SM-G920I
Бренд: Samsung Страницы: 2
Samsung SM-A310F Quick Start Manual preview
SM-A310F
Бренд: Samsung Страницы: 78
Samsung GT-S6500T Manual preview
GT-S6500T
Бренд: Samsung Страницы: 38
Samsung SCH-i600 Series Quick Reference Manual preview
SCH-i600 Series
Бренд: Samsung Страницы: 12
Samsung SGH-t329 Series Manual Del Usuario preview
SGH-t329 Series
Бренд: Samsung Страницы: 143
QMobile Q8 User Manual preview
Q8
Бренд: QMobile Страницы: 66
SMA SB3.0-1SP-US-40 Service Manual preview
SB3.0-1SP-US-40
Бренд: SMA Страницы: 17
Thrane&Thrane Capsat TT-3060A User Manual preview
Capsat TT-3060A
Бренд: Thrane&Thrane Страницы: 182
i-mobile Hitz 14 User Manual preview
Hitz 14
Бренд: i-mobile Страницы: 35
RADVision Scopia XT5000 Series User Manual preview
Scopia XT5000 Series
Бренд: RADVision Страницы: 55
Blu Dash Music 2 User Manual preview
Dash Music 2
Бренд: Blu Страницы: 28
Sony Ericsson WT19a Troubleshooting Manual preview
WT19a
Бренд: Sony Ericsson Страницы: 15
Avaya B109 User Manual preview
B109
Бренд: Avaya Страницы: 21
Blu DASH 4.0 User Manual preview
DASH 4.0
Бренд: Blu Страницы: 54
Delta CMC-EC01 Operation Manual preview
CMC-EC01
Бренд: Delta Страницы: 19
NEFFOS Y5L User Manual preview
Y5L
Бренд: NEFFOS Страницы: 69
jcb ToughPhone TP851 PRO TALK User Manual preview
ToughPhone TP851 PRO TALK
Бренд: jcb Страницы: 35
Barco R9861580US Installation Manual preview
R9861580US
Бренд: Barco Страницы: 124

Бренды по названию

Популярные бренды

Загрузить еще бренды