Mitel 6800 Series, Руководство администратора

Страница: 546 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-283
PIN AND AUTHORIZATION CODE SUPPRESSION
Certain features on MX-ONE require a PIN/Authorization code to be entered on the phone (for
example: to register, for authorization, locking/unlocking, or accounting).
The number format is the following:
*<feature code>*PIN# or *<feature code>*PIN*<number>#
To deactivate features, the first star is replaced by #, for example:
#<feature code>*PIN#.
Administrators can now configure the “
pin suppression dial plan
” parameter so that if such
a feature code with a PIN is entered, the PIN does not show up in any of the phone logs (i.e.
the Outgoing Redial List) nor is it displayed on the screen during a call. The phone will
dynamically mask the PIN on the display within a second of the code being entered by the user.
The “
pin suppression dial plan
” parameter introduces new alphanumeric characters that
control the masking of the PIN: “(“ and “)”.
The following is an example value of the new configuration parameter:
"*11*(1XXX)*5555+#|*72*(1XXX)#|#73*(1XXX)#"
where (1XXX) will mask any PINs that are 4 digits long and start with 1.
This parameter value should lead to the following masking:
• Entered digits *11*1234*5555# will lead to INVITE to this number but *11******5555# is
shown on the display and in the Outgoing Redial List.
• Entered digits *72*1234# will lead to INVITE to this number but
*72*****# is shown on the display and in the Outgoing Redial List.
• Entered digits #73*1234# will lead to INVITE to this number but
#73*****# is shown on the display and in the Outgoing Redial List.
Use the following procedure to configure the pin suppression feature using the configuration
files.
For specific parameters you can set in the configuration files, see Appendix A, the section,
“PIN
Suppression”
on page A-161.
Note:
The pin will be masked with wildcard characters (i.e. “*”) on the display and in the
logs.
CONFIGURATION FILES