Mitel 6800 Series, Руководство администратора

Страница: 710 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
8-7
•
auto resync max delay
- Specifies the maximum time, in minutes, the phone waits past
the scheduled time before starting a checksync.
•
auto resync days -
Specifies the amount of days that the phone waits between checksync
operations.
In the Mitel Web UI, you can set the following parameters at the path
Advanced
Settings->Configuration Server->Auto-Resync
:
• Mode
• Time (24 hours)
• Maximum Delay
• Days
Setting the “
auto resync max delay
” (Maximum Delay) and “auto resync days” (Days)
parameters can greatly reduce the load placed on the configuration server when downloading
configurations.
RELOADING OF DIRECTORY FILES DURING AN AUTO-RESYNC
During an auto-resync, the IP phones have the ability to initiate a comparison of its local directory
files with those located on the configuration server and automatically update the local directory
files if changes are detected
If the auto-resync mode is set to” Configuration Files (1)” or “Both (3)”, either through the IP
phone’s Web UI or configuration files, when the phone reaches the configured auto-resync
date/time, the phone will perform a comparison on the directory files and trigger a reboot if
differences are found.
If the auto-resync mode is set to “None (0)” or “Firmware Info (2)” and the phone reaches the
configured auto-resync date/time, the directory files will not be checked.
Note:
Irrespective of the auto-resync feature, if the phone receives a check-sync
NOTIFY, the directory file comparison will be performed and the applicable files will be
automatically updated as required.