Mitel 6800 Series, Руководство администратора

Страница: 580 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-317
CONFIGURING INDICATION OF TERMINATED CALLS
You can enable or disable whether or not the phone displays an indication of a terminated call
using the parameter, “
far-end disconnect timer
.” This parameter also specifies the maximum
time interval that the busy tone is audible on the phone. You can configure the indication of
terminated calls using the configuration files only.
Use the following procedure to configure this feature.
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Terminated Calls Indicator”
on
page A-213
.
Handling Call Termination Screens on the Phone UI
The following procedure describes how to handle the call terminated screens on your phone.
1.
Press the Goodbye key.
The busy tone stops and the call terminated screen no longer displays.
or
Select any Line key.
The busy tone stops and the call terminated screen no longer displays.
A dial screen displays.
CENTRALIZED CONFERENCING (FOR SYLANTRO AND BROAD-
SOFT SERVERS)
The IP phones include support for centralized conferencing (Ad-Hoc conferencing) for Sylantro
and BroadSoft servers. This feature provides centralized conferencing on the SIP server (versus
localized, on the phone) and allows IP phone users to do these tasks:
• Conference two active calls together into a conference call.
• When on an active conference call, invite another party into the call.
• Create simultaneous conference calls on the same IP phone (Sylantro servers only). For
example, the IP phone user at extension 2005 could create these two conferences, and
put one conference on hold while conversing with the other party:
• Line 1: conference together extensions 2005, 2010, and 2020.
• Line 2: conference together extensions 2005, 2011 and 2021.
Note:
This “indication of terminated calls” feature does not affect parked calls on the
phone or the conference call feature.
CONFIGURATION FILES
IP PHONE UI