Mitel 6800 Series, Руководство администратора

Страница: 177 / 1113

Network Settings
4-24
Errors Messages Display when Incorrect Network Settings Entered
The IP Phone UI AND the Mitel Web UI immediately notify the Administrator if an incorrect
value is being entered for the following network parameters in the IP Phone UI and the Mitel
Web UI:
• A 0.0.0.0 entered as values for the
IP Address
,
Subnet Mask
and
Gateway
parameters
•
IP Address
and
Gateway
IP address parameter values entered exactly the same
•
Gateway
IP address and the
IP address
parameter values configured on the same subnet
If you configure the Gateway parameter and the IP Address parameter on the same subnet,
the following error message displays:
“Gateway IP address and the IP address parameter values configured
are not on the same subnet”.
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Network Settings” on page A-10.
For the 6863i/6865i:
1.
Press on the phone to enter the Options List.
2.
Select
Administrator Menu.
3.
Select
Network Settings
.
4.
Select
IP Address
and enter the IP address of the phone.
5.
Select
Subnet Mask
and enter the subnet mask.
6.
Select
Gateway
and enter the gateway address.
7.
Select
DNS
and enter a Primary and/or Secondary DNS server.
8.
Press
Done
to save the changes.
The IP phone is manually configured.
For the 6867i/6869i:
1.
Press on the phone to enter the Options List.
2.
Press the
Advanced
softkey.
3.
Enter the Administrator password using the keypad. Default is “
22222
”.
4.
Select
Network > Settings
.
CONFIGURATION FILES
IP PHONE UI
Note:
To manually configure DHCP parameters, DHCP must be disabled on the phone.