Mitel 6800 Series, Руководство администратора

Страница: 498 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-235
The “
All
” option forwards all incoming calls for this account to the specified phone number
regardless of the state of the phone. The phone can be in the Busy or No Answer states,
or can be in the idle state. The phone still forwards all calls to the specified number.
The “
Busy
” option call forwards incoming calls only if the account is in the busy state. The
calls are forwarded to the specified phone number.
The “
No Answer
” option call forwards incoming calls only if the account rings but is not
answered in the defined number of rings. The call gets forwarded to the specified number.
8.
For each account, in the “
Number
” field, enter the phone number for which you want the
incoming calls to forward to if the phone is in the specified state.
If using the “
Account
” mode or “
Custom
” mode, you can enter different phone numbers
for each account.
Note:
You can use the “
Busy
” and “
No Answer
” states together using different
forwarding phone numbers. If these states are enabled for an account (the “
All
”
state is disabled), and the phone is in the busy state when a call comes in, the phone
can forward the call to the specified phone number (for example, voicemail). If there
is no answer on the phone after the specified number of rings, the phone can forward
the call to a different specified number, such as a cell phone number.
Notes:
1.
If you selected “Account” mode in step 4, you can enable/disable each account
or all accounts as applicable. You can enter different phone number for each
enabled state.
2.
If you selected “Custom” mode, you can enable/disable each account or all
accounts as applicable. You can enter different phone numbers for each enabled
state.
3.
If you selected “Phone” mode, all accounts are set to the same CFWD
configuration (All, Busy, and/or No Answer) as Account 1 on the phone. (In the
Mitel Web UI, only Account 1 is enabled. All other accounts are grayed out but
use the same configuration as Account 1.)
4.
Using the Mitel Web UI, if you make changes to Account 1, the changes apply
to all accounts on the phone. Using the IP Phone UI, if you make changes to
any other account other then Account 1, the changes also apply to all accounts
on the phone. When enabling a CFWD state, you must specify a phone number
for the phone to CFWD to. The number you specify applies to all accounts of
the same mode.
5.
Number and name of accounts that display to this screen are dependent on the
number and name of accounts configured on the phone. In the screen in step
6, Screenname1 is configured on Line 1, Screenname2 is configured on Line
2, and Screenname3 is configured on Line 3. The name for the account is
dependent on the name specified for the “
Screen Name
” parameter at the path
Advanced Settings->LineN
. If you do not specify a value for the “Screen Name”
parameter, the account name is based on the “
Phone Number
” parameter at
the path
Advanced Settings->LineN
. If neither the “Screen Name” nor the
“Phone Number” parameters are specified, the account name shows “1”, “2”,
“3”, etc. only.