Mitel 6800 Series, Руководство администратора

Страница: 92 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
3-21
Call Hold Reminder
Note:
This option can
be set by both Users
and Administrators.
call hold reminder Enables or disables the reminder ring splash timer to
start as soon as you put a call on hold (even when no
other calls are active on the phone). When enabled,
the phone initiates a reminder ring splash periodically
for the single call on hold. When disabled, no
reminder ring splash is audible.
For more information on this feature, see “Call Hold
Reminder (on Single Hold)” on page 5-87 .
call hold reminder
timer
Note:
This option can
be set by an
Administrator only.
Specifies the time delay, in seconds, that a ring
splash is heard on an active call when another call
was placed on hold. For example, if a call comes into
Line 1, and then a call comes into Line 2 and you
answer Line 2, Line 1 is automatically placed on hold.
While on the active Line 2, after 7 seconds, a ring
splash audio sounds on the line reminding you that
the call on Line 1 is still on hold. This timer begins to
increment after Line 2 is answered.
Notes:
1.
This parameter is used with the “call hold
reminder frequency” parameter.
2.
You must enable this “call hold reminder timer”
parameter for it to work.
3.
A value of “0” disables the call hold reminder
feature.
For more information on this feature, see “Call Hold
Reminder Timer & Frequency” on page 5-88 .
call hold reminder
frequency
Note:
This option can
be set by an
Administrator only.
Specifies the time interval, in seconds, between each
ring splash sound on the active line. For example, if a
call comes into Line 1, and then a call comes into Line
2 and you answer Line 2, Line 1 is automatically
placed on hold. While on the active Line 2, after 7
seconds, a ring splash audio sounds on the line
reminding you that the call on Line 1 is still on hold
(determined by the “call hold reminder timer”
parameter), and then the ring splash is heard again
after 60 seconds (determined by this parameter).
Notes:
1.
You must enable the “call hold reminder” and/or
“call hold reminder during active calls”
parameter(s), and the “call hold reminder timer”
parameter, for this parameter to work.
2.
A value of “0” prevents additional rings.
For more information on this feature, see “Call Hold
Reminder Timer & Frequency” on page 5-88 .
PARAMETER IN
MITEL WEB UI PARAMETER IN
CONFIGURATION
FILES DESCRIPTION