Mitel 6800 Series, Руководство администратора

Страница: 441 / 1113

Operational Features
5-178
•
7
: The behavior is determined by the global parameter “
play a ring splash
”.
• If “
play a ring splash
” is defined as 0 then the feature is disabled.
• If “
play a ring splash
” is defined as 1 then the behavior is the same as Normal.
• If “
play a ring splash
” is defined as 2 then the behavior is the same as Normal but
the ring splash plays when idle and also during the active call state.
•
8
: In call delayed (same as Normal delayed but ring splash plays when idle and also during
the active call state [use the “
ring splash delay
” parameter to define the delay]).
•
9:
In call periodic (same as Periodic but ring splash plays when idle and also during the
active call state [use the “
ring splash frequency
” parameter to define the ring splash
frequency interval for the active call state]).
•
10:
In call periodic delayed (same as Periodic delayed but ring splash plays when idle and
also during the active call state [use the “
ring splash delay
” parameter to define the delay
for the active and idle call state and the “
ring splash frequency
” parameter to define the
ring splash frequency interval for the active call state]).
•
11
: In call low volume (same as Low volume but ring splash plays when idle and also during
the active call state).
•
12
: In call low volume delayed (same as Low volume delayed but ring splash plays when
idle and also during the active call state [use the “
ring splash delay
” parameter to define
the delay]).
The following parameters are available allowing administrators to set and pass the control of
the ring splash to the key (instead of the phone using the global “
play a ring splash
” parameter).
• “
prgkeyN ring splash
”
• “
softkeyN ring splash
”
• “
topsoftkeyN ring splash
”
• “
expmodX KeyN ring splash
• "
hardkeyN ring splash
"
• “
ring splash delay
” (applicable when the “...keyN ring splash” parameter is set to a “de-
layed” alerting pattern)
• “
ring splash volume
” (applicable when the “...keyN ring splash” parameter is set to a “low
volume” alerting pattern)
• “
ring splash frequency
” (applicable when the “...keyN ring splash” parameter is set to a
“in call periodic” alerting pattern)
The per key settings overwrite the global setting (“
play a ring splash
” parameter) on the phone.
If the global parameter is
disabled
, a ring splash can still be enabled on a key basis. If the global
parameter is
enabled
, all keys will have a ring splash unless the value “0” is configured explicitly
for a key.