Mitel 6800 Series, Руководство администратора

Страница: 490 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-227
3.
Click on
Operation->Softkeys and XML.
4.
Pick a softkey to configure for parking a call.
5.
In the "
Type
" field, select
Park
.
6.
In the "
Label
" field, enter a label for the park softkey.
7.
Pick a softkey to configure for Picking up a call.
8.
In the "
Type
" field, select
Pickup
.
9.
In the "
Label
" field, enter a label for the Pickup softkey.
10.
Click
Save Settings
to save your changes.
11.
Click on
Reset
, then click
Restart
to restart the IP phone and apply the changes.
For the 6863i/6865i:
1.
Click on
Advanced Settings -> Line 1
(you can select any line)
2.
Under Advanced SIP Settings in the “
Park Pickup Config
” field, enter the appropriate
value based on the server in your network.
Notes:
1.
The”
Value
” and “
Line
” fields are already configured from the “
Park Pickup
Config
” field.
2.
The park softkey has a default state of “
Connected
”.
3.
Leave this state enabled or to disable, uncheck the check box.
Notes:
1.
The”
Value
” and “
Line
” fields are already configured from the “
Park Pickup
Config
” field.
2.
The pickup softkey has a default state of “
Idle
” and “
Outgoing
”.
3.
Leave these states enabled or to disable, uncheck the check boxes.
Notes:
1.
For values to enter in this field, see the table
“Park/Pickup Call Server Configuration
Values”
on
page 5-226
.
2.
Leave the park/pickup configuration field blank to disable the park and pickup
feature.