Mitel 6800 Series, Руководство администратора

Страница: 436 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-173
Click on
Operation->Programmable Keys
or
Click on
Operation->Expansion Module <N>.
Depending on your phone-model, the key configuration screen displays.
2.
Select a softkey, programmable, or expansion module key to configure.
3.
In the "
Type
" field, select "
BLF
" (Asterisk), "
BLF/List
" (BroadSoft BroadWorks).
4.
(For the 6867i/6869i/6873i softkeys) In the "
Label
" field, enter the name of the person
who’s extension you are monitoring.
5.
In the "
Value
" field, enter a value to associate with the softkey or programmable key.
For example, for BLF, the value is the extension you want to monitor.
For BLF/List, enter the BLF/List target’s resource URI, using the following syntax:
sip:username@domain.com;ext=extension number
whereby the “username@domain.com” is identical to the resource URI of the BLF/List key
configured on the call manager and the “extension number” (an optional value) corresponds
to the target’s extension number.
6.
In the "
Line
" field, select a line number that is actively registered to the appropriate SIP
proxy you are using.
7.
In the "
BLF List URI
" field, enter the name of the BLF list defined on the BroadSoft Broad-
Works Busy Lamp Field page for your particular user.
For example, sip:9@192.168.104.13.
8.
Select the line state (idle, connected, incoming, outgoing, busy) that you want to apply to
the BLF softkey or programmable key.
9.
Click
Save Settings
to save your changes.
Note:
If BLF/List type is selected, the label value is optional. If a label is defined it
is displayed on the phone’s screen up until the BLF/List key has been updated by
the call manager. If a label is not defined, the label will be displayed as a series of
question marks (i.e. ???) until it is updated with the appropriate data from the call
manager.
Note:
If a resource URI is not defined in the
Value
field, the key will be automatically
populated using the first resource entry from the BLF/List NOTIFY data that has not
already been populated (either manually or automatically).
Note:
The value of the BLF/List URI parameter must match the list name configured.
Otherwise, no values display on the screen and the feature is disabled.