Mitel 6800 Series, Руководство администратора

Страница: 530 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-267
Configuring Interoperability with a Microsoft Exchange Directory Using the
Configuration Files
Use the following procedures to configure interoperability with a Microsoft Exchange Directory.
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Exchange Directory Settings”
on
page A-132
.
BROADSOFT XSI DIRECTORIES
The 6800 Series IP phones also support interoperability with BroadSoft Xsi directories such as
Enterprise Directory, Personal Contacts, Enterprise Common Phone List, Group Directory, and
Group Common Phone List. When configured, the IP phones will retrieve the respective
BroadSoft Xsi directory and add folders to the Directory menu where they can be accessed by
users.
Administrators can fully configure the Xsi directories by defining the following parameters in
the configuration files:
exchange
contacts resync
days Specifies the amount of days that the phone waits between Microsoft Exchange
directory resync operations.
exchange
contacts resync
max delay Specifies the maximum time, in minutes, the phone waits past the scheduled time
before starting a Microsoft Exchange directory checksync.
CONFIGURATION FILES
Parameter Description
xsi ip Specifies the Xsi Enterprise Directory credentials (if applicable) and IP
address or Fully Qualified Domain Name (FQDN) of the Xsi server in the
following syntax:
server
or
username:password@server
Note:
Xsi credentials defined through the "
xsi ip
" parameter are only applicable
to the Xsi Enterprise Directory feature and not applicable to user-related Xsi
features (such as Speed Dial 8, Basic Call Log, Hide Number, Remote Office,
Simultaneous Ring Personal, Call Center, and BroadSoft Anywhere) and other
Xsi directories. Credentials for the user-related Xsi features require encryption
and therefore must be entered through the phone’s Options List > Credentials
menu.
xsi protocol Specifies the protocol (either HTTP or HTTPs) used for communicating with the
Xsi server.
xsi port Specifies the port used for communicating with the Xsi server.
PARAMETER DESCRIPTION