miDoor: revision 0.01
Installation and Reference
© Mission Machines, Inc., 2012
11
4
Push'Button'(Door'Controller)'
This is a replacement push button for the original garage door controller push button. Push
this button to control the garage door. This button will cause the door to operate in the same
way that the original push button operated the garage door. Typically a push will either open
or close the garage door or if the door is in operation will stop the door operation.
This button also serves two addition functions. If the button is depressed for 5 continuous
seconds it will cancel any active alarms.
If this button is depressed while the miDoor device is booting up (depressed while power is
applied) then the miDoor will enter initial configuration mode (see Initial Configuration.)
5
Buzzer'
When there is an active alarm and if that alarm was configured to ring the buzzer then a high-
pitch buzzer will sound. Depressing the push button for 5 continuous seconds can stop the
buzzer by clearing the currently active alarm.
Button Faceplate
8
Temperature
Sensor
1
Power Jack
7
USB 2.0
2
Garage Door
Opener
3
Garage
Door Sensor
4
Configurable
I/O A
5
Configurable
I/O B
6
Configurable
I/O GND
Figure 3 (Bottom of miDoor)
