Using the Configurator
171
Correlate a custom message with an input or output
1. Right-click
your custom message, and then click
Add Correlations
.
For input messages, the possible correlations are separated into
Alarm
,
Supervisory
,
Trouble
and
Monitor
.
For output messages, the possible correlations are separated into
Signal
and
Relay
.
2. Select the input or output that you want to correlate with the message, and then click
Add
.
For an input message, the message is displayed in the corresponding queue when the
zone becomes active.
You can correlate an input or output with only one custom message at a time.
You cannot correlate inputs of different types with the same message. For example, if you
correlate a message with a monitor zone, you cannot also correlate it with an alarm zone.
19.24 Audio Controller
Add an audio controller
1. Select the node that you want to add the audio controller to.
2. Click
Insert
in the menu bar, then click
Add Audio Controller
.
The audio controller is added.
Note:
Your organization needs audio systems training in order to add an audio
controller to a job. To check whether you have this training, see section 2.9 on
page 22.
i
