Using the Configurator
141
19.5.2
Audio Setup
This section explains the options in the Audio Setup window, which lets you choose how the
audio components of the network will operate.
See the Audio Setup window
•
In the
Audio
section of the
Job Details
window, click
Set up
.
The
Audio Setup
window appears.
Figure 105 Audio Setup
Signal Tones and Messages
The
Signal Tone and Messages
section allows you to set the tone or message that will be
played under different event conditions. The
Manage Messages
button takes you to the
Manage Messages
screen (section 19.5.3 on page 142) where you can work with the
catalogue of digital messages available for selection here.
Alert
Click on the ellipsis to bring up the
Choose a Message
version of the
Manage Messages
window. Select the
tone or message that you want played when the system is
in the Alert (Stage 1) state. (The Built In message
Temporal is selected by default.)
Evac
Click on the ellipsis to bring up the
Choose a Message
version of the
Manage Messages
window. Select the
tone or message that you want played when the system is
in the Total Evacuation (Stage 2) state. (The Built In
message Evac is selected by default.)
Manage Messages
Click on the
Manage Messages
button to open the
Manage Messages
window, where you can manage your
catalogue of digital messages. See section 19.5.3 on
page 142.
