SNMP-SSL
42
Homepage Refresh Rate
This menu allows the administrator to set the refresh rate of the SNMP-SSL card’s web
pages. When finished click Set Value to save the settings.
Figure 5-11 Homepage Refresh rate
Email Notification
This menu allows the administrator to configure the email setting to receive notifications
and/or reports from SNMP-SSL card by email once an event has occurred.
1.
Mail Server:
The Hostname of the SMTP Mail Server that will be used to send
emails from the SNMP-SSL card. If entering a Hostname, you are also required to
enter the DNS Address.
2.
User Account:
The default has no entry. The User Account is only required if Mail
Server requires authentication to send emails.
3.
User Password:
The User Password is for the User Account.
4.
SMTP Authentication:
This is only required if Mail Server requires authentication to
send emails.
5.
Sender’s Email Address:
A legitimate email address is required for the SNMP-SSL
card to send emails.
6.
Mail Subject Prefix:
The subject line to identify the device, which sends out the
email.
7.
DNS Address:
The IP Address of the DNS server.
8.
Mailing Daily Status Report At (hh:mm):
The SNMP-SSL card will send a Daily
Status report to select Mail Receiver at the specified time.
9.
Mail Account:
Enter the email address of the mail recipient.
10.
Description:
This column is for entering describing of each Mail Receiver you
configure for reference purposes.
