SNMP-SSL
40
SNMP TRAP Receivers
This menu allows the administrator to configure the SNMP-SSL card to send SNMP Traps
to eight different Network Management Stations (NMS). The MIB files must be installed on
the NMS.
1.
Index:
The index number of the entry in the table.
2.
NMS IP Address:
The IP Address of the NMS station to which the trap should be
sent.
3.
User Name:
The User Name of the specified trap receiver. 19-characters are the
maximum length of the string.
4.
Trap Type:
Types of traps to be received.
a. None: No traps are to be received.
b. RFC-1628 Trap: Traps are received base on RFC-1628.
c. SNMP-SSL Trap: Traps are received base on SNMP-SSL MIB.
5.
Severity:
Set the level of the trap to be received. There are three levels:
a. Information: Traps of general information are received.
b. Warning: Traps that warn of the impending danger are received.
c. Severe: The significant traps such as the UPS failure and severe events are
received.
6.
Description:
Customer description string.
Figure 5-9 SNMP TRAP Receivers
