SNMP-SSL
51
By clicking on the gauge, the gauge will change to a graph chart.
Figure 7-2 UPS Monitoring (Gauge and Graph view)
Display switch-
Two different display styles (Gauge or Overall Chart presentation)
of the UPS’s key parameters. This icon is used to switch the display from gauge
presentation to chart presentation and vice versa.
Poll Rate-
Configure the poll rate of the carts and gauges. The default is 5
seconds.
Event Message-
Enable and disable the display of the warning messages.
Event message broadcast
– Enabled or disable the event message dialog box.
Exit
– Exit from the Java applet.
Status Bar
Figure 7-3 Status Bar in the UPS Monitoring
The status bar displays the current status of the UPS. The green color represent that the
UPS is in the normal condition. If SNMP-SSL card receives a status change of the UPS,
for example an AC failure, the AC OK box will then change to a red color and display AC
fail representing that the UPS has lost utility power.
Alarm Windows
When SNMP-SSL receives a change in the status it will display a specific message in the
Alarm Window. This type of status message is an alarm. The Alarm Window displays the
active alarms of the UPS and SNMP-SSL card.
