SNMP-SSL
4
Chapter 1 Introduction
Features
•
Network connection through RJ45 connector
Allows connection of the UPS directly to the network through a RJ45 connector
without using RS232 ports on the computer and without loading any individual UPS
management software on the network server.
•
Network UPS management
Allows remote management of the UPS from any workstation through Internet or
Intranet.
•
Remote UPS monitoring via SNMP, HTTP and JAVA applets
Allows monitoring of the UPS using SNMP-SSL card’s MIB (Management
Information Base) files - provided with SNMP-SSL card, Internet Browser or Java
monitoring applets.
•
Configure UPS and SNMP-SSL card’s functions from any client (password
protected)
Set UPS and SNMP-SSL card’s parameters from any SNMP management station or
through Internet Browsers.
•
Monitor power quality via Java Applets
Provides visual indication on screen through dynamic graphics.
•
Keep event logs & metering data in flash memory
Provides a history file of the UPS: power events, power quality, status, and battery
condition.
•
Notification of system administrator via SNMP Traps, Java applets
•
RTC supported
•
Shutdown Watchdog enabled
•
Telnet support for configuration
•
BOOTP/DHCP supported
•
GUI for homepages and Java applets
•
Online configuration supported
•
Standard UPS MIB (RFC1628) supported
•
Enhanced HTTP security
•
No restart needed for IP change
•
System parameters/log write to flash memory simultaneously
•
SSH and SSL supported
•
WOL function supported
•
Supports SSL-EMD (Environmental Monitoring Device) to measure the
temperature and humidity.
•
Supports SSL-SMOKE (Smoke Detector Device) to detect smoke
•
Supports SSL-WATER (Water Leak Sensor Device) to detect water leaks
•
Supports SSL-DOOR (Door Sensor Device) to detect open doors
•
Supports SSL-VIBRATION (Vibration Sensor Device) to detect vibrations
•
NTP & ICMP supported
•
SNMPv3 supported
