SNMP-SSL
16
19. In the SNMP-SSL Configuration Utility Main Menu, select “4” to configure the
Domain User settings.
Figure 2-19: Domain User Table
After completing these settings, select “0” to return to the SNMP-SSL Configuration
Utility Main Menu.
20. In the SNMP-SSL Configuration Utility Main Menu, select “5” to configure the Trap
Receiver settings. If you want to use a PC to perform the SNMP manager ‘trap’
function in order to manage UPS through SNMP-SSL card, the IP address of the PC
must be added to the SNMP-SSL list.
Note:
The Set Trap Receivers configuration is used only for an NMS.
Figure 2-20: Trap Receiver Table
After completing these settings, select “0” to return to the SNMP-SSL Configuration Utility
Main Menu.
