SNMP-SSL
38
SNMP/HTTP Access Control
This menu allows the administrator to configure the SNMP/HTTP Access Control to
enable specific workstations for read/write access to the SNMP-SSL card. See Appendix
B HTTP Security Control.
NMS Table:
1.
Index:
The index number of the entry in the table.
2.
NMS IP Address:
IP address 255.255.255.255 grants the access right to all IP
address.
3.
Community:
Low-level password of the associated IP address with the access type
set by the Administrator.
4.
Access Type:
Access right associated with the IP Address. Available options are:
a. NotAccess
b. Read
c. Read/Write.
If the IP Address is set to NotAccess or Read, not even the administrator will have
access.
Domain User Table:
1.
Index:
The index number of the entry in the table.
2.
User Name:
This shows the user name with the specified access level.
3.
Access Type:
Available options are: Read Only, Read / Write, No Access.
Note:
As administrator, you can configure different workstations or subnets using
different passwords with different Access Types. This will prevent someone from
arbitrarily changing the passwords.
Figure 5-7 SNMP/HTTP Access Control
