SNMP-SSL
56
Chapter 9 Shutdown Software
The shutdown software is a very useful component of the SNMP-SSL card. The shutdown
software runs on servers and connects to a designated SNMP-SSL card. When the
servers start up, SNMP-SSL card scans the status of the UPS and broadcast a shutdown
command to the workstation when a power event is detected. The shutdown software will
broadcast warning messages on the screen of the servers and then perform a graceful
shutdown of the server.
Installing the Shutdown Software in Windows
1. Insert the SNMP-SSL CD-ROM into the CD-ROM drive.
2. Run the “
SD_SNMP-SSL Service_4.20.exe
” program on the CD-ROM.
3. A dialog box will be on the screen, type in the IP address of designated SNMP-SSL
card, its client name and shutdown delay time. Click the
Def.
Button if you choose
the client name as the workstation you are working on.
Figure 9-1 Set up screen
4. Then press the ‘
OK
’ button.
5. After the set up is complete, the shutdown service will connect to the SNMP-SSL
card automatically.
Note:
The client Shutdown Delay must not be greater than that of the UPS Shutdown
Delay.
