Minolta Minoltafax 1300, Руководство пользователя, Страница: 85 / 114

C
ONNECTING THE
F
AX TO THE
C
OMPUTER
78 Minoltafax 1300
7.2.3 Entering Modem Commands with the Computer
Using these commands you can adjust the software and the Minoltafax.
The commands required by the software are given in the software manual.
The Minoltafax supports the following commands:
Command Parameter Function Initial
position
A none response to the call
D 0-9,*# Dial code
P Pulse dial set
R PSTN access form PABX extension
T Tone dial set
, Pause
E 0 No return command echo E1
1 Return command echo
H 0 Hook ON
M 0 Monitor speakers always OFF M0
1 Speaker is turned OFF by detecting
carrier
2 Speaker is always ON
3 Speaker is OFF during dialling or after
detecting carrier
P none Pulse dial set
T none Tone sial set
V 0 Response code with number V1
1 Response code with alphabet
Z none Initialise machine setting
&F none Return the machine to factory setting
&K 1 RS/CS Flow control (hardware flow
control) &K1
2 XON/XOFF flow control (software flow
control)