Mindray BeneView T8, Руководство по эксплуатации

Страница: 121 / 290

Monitoring IBP
11-5
„ [
Dia
]: alarms are given only when the diastolic pressure violates the alarm limits.
„ [
Mean
]: alarms are given only when the mean pressure violates the alarm limits.
„ [
Sys&Mean
]: alarms are given when the systolic or mean pressure violates the alarm
limits.
„ [
Mean&Dia
]: alarms are given when the mean or diastolic pressure violates the alarm
limits.
„ [
Sys&Dia
]: alarms are given when the systolic or diastolic pressure violates the alarm
limits.
„ [
All
]: alarms are given when the systolic or mean or diastolic pressure violates the alarm
limits.
11.5.4 Setting the Pressure Unit
In the setup menu for the pressure, select [
Unit
] and toggle between [
mmHg
], [
cmH2O
] and
[
kPa
].
11.5.5 Setting Up the IBP Wave
In the waveform menu for the pressure, you can:
„ Select [
Sweep
] and then select the appropriate setting. The faster the wave sweeps, the
wider the wave is.
„ Change the size of the pressure’s waveform by adjusting [
Upper Scale
], [
Middle Scale
]
or [
Lower Scale
].
11.6 Zeroing the Transducer
To avoid inaccurate pressure readings, the monitor requires a valid zero. Zero the transducer
in accordance with your hospital policy (at least once per day). Zero whenever:
„
A new transducer or adapter cable is used.
„ You reconnect the transducer cable to the monitor.
„ The monitor restarts.
„ You doubt the readings.
1. Turn off the stopcock to the patient.