4
◆
Setting
Attention
Please carry the CK10 carefully.
Otherwise, the product may get damaged or user’s foot may get injured by
dropping the product.
Use non-flammable materials such as metal in the place where the CK10 is
to be installed.
Otherwise, a fire may occur.
When installing several CK10 in to be sealed place, install a cooling fan to
keep the ambient temperature of the product as 50
℃
or lower.
Otherwise, a fire or other kinds of accidents may occur due to overheating.
Attention
The process of installation, Connection, Operation, Checking and Repairing
should be done by qualified person.
Otherwise, a fire or other kinds of accidents may occur.
◆
Connect Cables
Attention
Keep the rated range of input Voltage for drive. Otherwise, a fire or other
kinds of accidents may occur. Cable connection should be following the
wiring diagram. Otherwise, a fire or malfunction of machine may occur.
Warning
Before connecting cables, check if input power is off..
Otherwise, an electric shock or a fire may occur.
The case of this CK10 is installed from the ground of the internal circuit by
the condenser, Please Ground the CK10.
Otherwise, an electric shock or a file may occur and a cause of malfunction of
machine.
◆
Operation & Setting change
Attention
If a protection function (Alarm) occurs, firstly remove its cause and then release
(Alarm reset) the protection function.
If you operate continuously without removing its cause, the machine may get
damaged or the user may get injured.
Make all input signals to OFF before supply input voltage to drive.
The machine may get damaged or the user may get injured by motor operation.
All parameter values of CK10 are set by default factory setting value. Change
this value after reading this manual thoroughly.
Otherwise, the machine may get damaged or other kinds of accidents may occur.
