MIMAKI Tx300P-1800B, Руководство по эксплуатации, Страница: 76 / 144

Chapter 3 Machine setting
3-16
5
Press to select a set value
(AUTO/ STRONG/ WEAK), and press the
key.
• Set value : ON/ OFF
6
Press the key several times to
end the setting.
Setting the Display of Media Residual
Whether the screen displays the remaining amount of a
media is set.
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press to select “MEDIA
REMAIN”, and press the key.
3
Press to select ON/OFF.
4
Press the key.
5
Press the key several times to
end the setting.
Setting the PG Drop Adjust
Adjust the outward and return ink drop positions during
bidirectional printing.
PG Drop Adjust adjusts the ink drop positions at two
points where the head height is not the same, so that high
quality printing can be realized by automatically adjusting
the ink drop positions even if the head height changes.
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press (>>) .
3
Press to select “PG DROP
ADJUST”, and press the key.
4
Loosen the carriage height adjustment
screw and press the
key.
• Loosen the screen by referring to P.2-5 “Adjusting
the Head Height”.
5
With the head height set as 3 mm, tighten
the height adjustment screw.
6
Press the key twice.
• Ink drop position adjustment patterns 1 to 5 will be
printed.
7
Correct the dot positions in patterns 1 to 5
by referring to P.3-6 “If the Positions of
Dots Shift...”.
8
By referring to steps 4 to 7, change the
head height to 4 mm and then correct the
dot positions in patterns 1 to 5.
9
Press the key several times to
end the setting.
Setting the Media Detection
Sets the Media Detect function.
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(>>)
.
3
Press to select “INPUT
THICKNESS”, and press .
4
Press to select “ON/OFF”, and
press the key.
When the media
remaining amount
display is turned to
“ON”
the remaining amount of a media is
displayed in Remote.
(However, when a leaf media is used,
the length of the media to be printed is
displayed.)
When the media
remaining amount
display is turned to
“OFF”
the remaining amount of a media is not
displayed in the Remote.
• The amount of a media that has been fed by the
printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the
remaining amount) is entered when a roll media is
detected.(
P.2-15)
• The setting configured here does not become
effective unless media detection is performed after
the setting has been complete.
• When set “ON” the media remaining display, you
can print the list of current media remaining
amount and the date. (
P.2-15)
Setting of Media
Thickness Set whether to enter the thickness of
the media during media detection.