MIMAKI Tx300P-1800B, Руководство по эксплуатации, Страница: 109 / 144

4-21
1
2
2
4
5
6
Chapter 4 Maintenance
10
Close the drainage valve, and press the
key.
11
Once the message "Water will be
supplied." is displayed, press the
key.
• Water supply will begin and the message “Water
is being supplied. Please wait momentarily.” will
be displayed.
12
Once the message "Water supply
completed. " is displayed, press the
key.
13
Press the key.
• The message “The wash unit is returning to
standby position. Please wait momentarily” is
displayed.
• Once the wash unit has returned to standby
position, the replace water setting screen will be
displayed.
Wash Unit Maintenance
Cleaning the Belt Wash Unit
Move the belt washing unit to the maintenance position
and perform the cleaning of the washing brush and inside
of the tray.
1
Press
(MENU)
in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press to select “BELT WASH
UNIT”, and press the key
• The washing unit maintenance start page will be
displayed.
3
Press the key.
• When setting the media using the feeding tension
bar, the tension bar falls down.
4
Remove the feeding unit.
• When the media has been placed, remove it.
• Remove the feeding unit out from the machine
and move it.
5
Press the key.
• Wash unit movement instructions will be
displayed.
6
Press the key.
• The wash unit will move towards the back of the
machine.
7
Clean the washing unit.
• When the quantity of water supply is too much or
few, adjust it by the cook of the water supply valve.
• When you want to divert water to the washing tray,
press the [ENTER] key.
The water supply valve opens to supply water to
the washing tray.
• When you want to turn off water, press the
[ENTER] key once again. The water supply valve
is closed.