MIMAKI Tx300P-1800B, Руководство по эксплуатации, Страница: 106 / 144

4-18
Chapter 4 Maintenance
Fill up Ink
Supplies ink to correct nozzle clogging.
1
Press
(MENU)
in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press to select “FILL UP INK”,
and press the key.
3
Press to select the filling head,
and press the key.
4
Press the key.
• Ink is supplied automatically.
5
Press the key several times to
end the setting.
Replacing consumables
Replacing the wiper
The wiper is consumable. When the display indicates the
warning message “Replace a WIPER” it is necessary to
check and replace the wiper, immediately replace the
wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
1
Press
(MENU)
in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press the key.
• “STATION” will be selected.
3
Press to select “WIPER
EXCHANGE”, and press the key.
4
Press the key.
• The carriage will move onto the belt.
.
5
Remove the wiper.
• Pull out the wiper by holding the protrusions at its
both ends.
• When the warning message for replacing wiper is
shown, confirm whether there is no damage and
fuzz at the top edge of the wiper film. If there is no
damage on the top edge of the wiper film, it is
possible to use the wiper continuously without
replacing it.
• A cleaning wiper is an option.Buy one through the
dealer in your region or at our service office.
Carriage
Projection