MIMAKI Tx300P-1800B Скачать руководство пользователя страница 24

Страница: 24 / 144

Chapter 1 Before Use

1-10

Connecting the power cable

Insert the power cable into an inlet of the
machine.

Secure a cable band.

• Secure the cable with the cable band attached to

this machine.

Insert the power plug into a plug socket.

Setting Ink

Take out the 2L ink pack.

• Take out the 2L ink pack and the IC chip from a

small cardboard box.

Mount the IC chip.

Put the 2L ink pack into the
2L eco-case.

(1)

Open the 2L eco-case as shown on the right.

• Do not use any power cables other than the

attached power cable.

• Be sure to connect the power cable to the outlet

near this machine, and make sure that the power
cable can be easily removed.

• Connect the power cable to the grounded

outlet.Otherwise, it may result in fire or an electric
shock.

Inlet

Power cable

Cable band

Power plug

Socket

• Be careful of the IC chip direction. If it is set in the

wrong direction, ink is not supplied properly.

2L ink pack

IC chip

Insert the chip facing the metal
side to the left.
Do not touch the metal part
while inserting. (The IC chip
may be damaged by static
electricity.)

(2) open to right

and left.

(1) While pressing

the finger grip,

Содержание Tx300P-1800B

















































































































































Результаты поиска

Содержание Tx300P-1800B

Отзывы:

MIMAKI Tx300P-1800B, Руководство по эксплуатации, Страница: 24 / 144

Результаты поиска

Содержание Tx300P-1800B

Отзывы: