MIMAKI SWJ-320EA, Руководство по эксплуатации

Страница: 24 / 116

Chapter 1 Before Use
1-12
8
While checking the ink remaining amount
indicator, add ink.
• Depending on the ink type, aluminum sheet
adheres to the bottle top surface. In such a case,
remove it with a cutter.
• While checking the ink remaining amount
indicator below the ink tank, add ink. For details,
refer to P.1-10 “"Rough standard for adding ink"”.
9
Attach the ink tank cap firmly.
10
Lightly press down the ink tank.
• Press down the ink tank about 5mm so that this
machine can correctly recognize the amount of
refilled ink. Then slowly replace the ink tank.
About IC chip
• The IC chip has information of ink color, remaining
amount of ink, expiration data, etc.
When filling the ink, insert the IC chip packed with the ink
bottle into the IC chip inserting port.
• If an IC chip that is not paired with the ink bottle is
inserted, ink can not use.
• The mark indicating color information is pasted on the IC
chip.
When [INK NEAR END] is displayed
There is a little of ink left. You can print continuously,
however, ink may end during printing. It is recommended
to add ink as soon as possible.
Press the [ENTER] key in Local to check the ink tank that
requires refilling in Local Guidance. (
P.3-22)
When [INK END] is displayed
When it becomes Ink end (remaining amount of ink is
none), the machine cannot print. Refill ink.
Restrictions of this machine
The expiration date of ink consumption is indicated on the
ink bottle. If used beyond the expiration date of ink
consumption, ink ejection failure and color change may
occur. You can print after the expiration date, but we
recommend that you replace it with new ink or use it up as
soon as possible.
Ex.) When the expiration date is April 2020
May
：
Replace with new ink or use up as soon as
possible. It is possible to print.
June ： Replace with new ink or use up as soon as
possible. It is possible to print.
July ： Cannot print.
• Attach the cap firmly.
• Do not press down the ink tank 10 mm or more.
After pressing down the ink tank, be sure to slowly
replace the tank.
If the ink tank is returned intensely, the amount of
ink cannot be accurately detected.
• Do not press down the ink tank with strong force. It
may damage the tank.
• The ink tank, when containing 3 L or more of ink,
may not come down sufficiently even if you try to
press down the tank. In such a case, do not force
down the tank any more.
• A message will be displayed on the display to let
you know.
• When the ink is unusable, printing and/or cleaning
operation and charging with the IC chip ( P.1-
10) are disabled.
In that case, please perform the follow operation.
(1)
Discard the ink remaining in the ink tank of
the machine.
(2)
Refer to “Replace the ink tank” on step 5 of
P.4-21, and reset the ink charge information.
(3)
Press the [END/ POWER] key several times
to return to the local.
(4)
Refill with new ink.Refill with new ink.
(
P.1-10)
Ink color Indication mark
Black (one black circle)
Cyan (one blue circle)
Magenta (one red circle)
Yellow (one yellow circle)
IC chip
Mark indication
position