MIMAKI CJV30-100BS страница 20 Скачать руководство пользователя

Страница: 20 / 296

1-4

Names of Parts and Functions

Front Side of the Machine

Tool tray

A tool tray is provided so that you
can put the small tools such as
cutter knives, pens, etc. on it.

Carriage (printer unit)

Moves the print head unit from side to side.

Operation panel

This panel has operation keys for configuring the
settings needed for this machine and a display for
showing the items to operate.

Clamp lever (front)

Moves the pinch rollers up and down to hold or release
the media.

Power switch

Turns ON/OFF the power to the machine.

Waste ink tank

Waste ink gathers in this tank.

Stand

Supports the main body of the machine. It is provided
with casters that are used to move this machine.

Take-up device

Automatically winds up the roll media printed.

Maintenance cover

Open the cover when carrying out maintenance. Even
when the power switch is OFF, keep the cover closed.

Platen

The printed media is printed out, sliding on the platen.
Three heaters are installed inside the platen.

Print heater/Post-heater

Fixes and dries the ink on the currently produced print.
(Located inside the platen)

Ink cartridge

The cartridge contains ink for each color.

Cartridge protection cover

This cover prevents an injury to the operator or
the breakage of the machine caused by the
protrusion of the cartridge.
(It is located under the ink cartridge.)

*1 : The power switch under the operation panel lights up in green when the power is turned ON, and blinks when the power switch is

turned OFF. The ink clogging prevention function is regularly performed even when the power switch is turned OFF with the main
power switch (

P.1-5) kept ON. (Sleep function

P.6-26)

Carriage (cutter unit)

Moves the cutter head unit from side to side.

Содержание CJV30-100BS









































































































































































































































































































Результаты поиска

Содержание CJV30-100BS

Отзывы:

Похожие инструкции для CJV30-100BS

Бренды по названию

Популярные бренды

MIMAKI CJV30-100BS, Руководство по эксплуатации

Результаты поиска

Содержание CJV30-100BS

Отзывы:

Похожие инструкции для CJV30-100BS

Бренды по названию

Популярные бренды