MIMAKI CJV30-100BS, Руководство по эксплуатации

Страница: 121 / 296

3-45
Machine Settings
3
Ex
tended F
unctions
– Printer –
6
Press the key.
• Usable amount of remaining ink is recalculated.
• The contents displayed differ depending on the amount of remaining ink.
(1)When ink still remains
• Return to the local mode or the remote mode.
• [Ink Level] warning disappears and the state of the 600 cc cartridge
that Ink Level Set function was performed changes to [INK NEAR
END] warning.
• [INK NEAR END] warning can be checked on the guidance function.
( P. 5-14)
(2)When no ink remains
• A message for replacing the ink pack is displayed.
• Press the
key to return to the local mode or the remote
mode.
• [Ink Level] warning is still displayed and the state of the 600 cc
cartridge that Ink Level Set function was performed changes to [INK
END] warning.
• [INK END] warning can be checked on the guidance function.
( P. 5-14)
●
When an error occur in the Step 6
This function stores the calculated quantity of remaining ink in the ink chip of the 600cc cartridge.
If the 600cc cartridge is removed or there is a problem on the contact of this
device and the ink chip, the data storage in the ink chip cannot be performed.
In this case, the message on the right will be displayed.
If the message is displayed, reinsert the 600cc cartridge and follow the
procedures from the Step 2 again.
• Once a message for replacing the ink pack appears, immediately replace the target ink pack with a new
one. (Usable ink has been used up.)
• Ink in the ink pack cannot be completely used up. To prevent ink supply errors, about 30 cc of ink must
remain in the ink pack. (Before shipping, more than 630 cc of ink is filled in the ink pack to use 600 cc.)
< LOCA L . 1 > [ # 0 1 ]
I n k L e v e l S e t . . C . . . . .
R e p l a c e i n k p a c k : e n t
< LOCA L . 1 > MMCCYYKK
I n k L e v e l - - E - - - - -
Changes the display
from [L] to [E].
* * * 6 0 0 c c E r r o r * * *
P r e s e r v a t i o n f a i l u r e