MIMAKI CJV30-100BS, Руководство по эксплуатации

Страница: 200 / 296

6-6
Cleaning the Wiper and Cap
It is recommended that the wiper and cap be cleaned frequently in order to maintain the high image quality of the
machine and keep the machine itself in good working order.
1
Press the key in LOCAL to select the
printing mode.
2
Select [ST. MAINTENANCE] of the maintenance menu.
(1) Press the key.
(2) Press to select [MAINTENANCE] and press the key.
3
Press the key.
4
Press the key.
• The carriage moves onto the platen.
5
Remove the wiper.
• Pull out the wiper by holding the protrusions at its both ends.
6
Clean the wiper and bracket.
• Wipe off the ink sticking to the wiper and bracket with a clean
stick dipped in cleaning solution for maintenance.
• Clean the wiper and the area around it about twice a week (it varies, depending on frequency in the use
of the machine).
• Replace the wiper with a new one when it is extremely dirty or bent. ( P.6-8)
• When cleaning the wiper, be careful that lint from the clean stick does not get left on the wiper.
Remaining lint may cause image quality to deteriorate.
< LOCA L . 1 > [ # 0 1 ]
WI DTH : * * * * mm
S T . MA I NT ENANCE
CARR I AGE OUT
< e n t >
Protrusion
Wiper
Bracket