MIMAKI CJV30-100BS, Руководство по эксплуатации

Страница: 228 / 296

6-34
Setting the Interval between Each PUMP Tube Washing Operation in the Standby Mode
The PUMP tube is washed regularly to prevent nozzle clogging caused by ink coagulation in the tube.
1
Press the key in LOCAL to select the
printing mode.
2
Select [ROUTINE SETUP] of the maintenance menu.
(1) Press the key.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [ROUTINE SETUP].
(4) Press the key.
3
Press to select [PUMP TUBE WASH].
4
Press the key.
5
Press to set the interval between each PUMP
tube washing operation.
• Set value: OFF or 1 to 168 hours
6
Press the key.
7
Press the key several times to end the setting.
• This function can be performed only when the states shown by the screens below are maintained.
• When the machine has not been filled with cleaning solution, the
screen on the right appears in Step 5. Fill the machine with
cleaning solution (
P.6-10) and perform the operations in Step 1
and later.
• If the cleaning solution is not set, it does not work.* Set the
cleaning solution.
*
For [!Wash Liquid END], it works to use up the cleaning solution, however, replace early.
< LOCA L . 1 > [ # 0 1 ] * REMOT E . 1 * [ # 0 1 ]
0 . 0 0m
LOCAL REMOTE
< LOCA L . 1 > [ # 0 1 ]
WI DTH : * * * * mm
ROUT I NE SE TUP
PUMP TUBE WASH < e n t >
ROUT I NE SE TUP
WASH I NT ERVA L
= 1 h
ROUT I NE SE TUP
WASH I NT ERVA L
= 4 h
ROUT I NE SE TUP
PUMP TUBE WASH < e n t >
* Wa s h L i q u i d U N - F I L L *
< LOCA L . C > ! WSH [ # 0 1 ]
CUT 1 ( 3 0 / 6 0 / 0 . 3 0 )
< LOCA L . 1 > [ # 0 1 ]
! Wa s h L i q u i d C a r t . NONE
or