MIMAKI CF3-1610, Руководство по эксплуатации

Страница: 9 / 166

viii
Introduction
Thank you for purchasing a CF3 Series Flatbed Cutting Plotter.
This manual describes the CF3 Series Model TF2, Model R1, and Model M.
Carefully read this manual and then store it in a place where it can be easily reached.
On This Operation Manual
• This manual describes the operation and maintenance of the CF3 Series Flatbed Cutting Plotter ("the unit").
• Carefully read this manual and then store it in a place where it can be easily reached.
• Ensure that this manual reaches the person using the unit.
• Every care was taken when writing this manual. Please contact your Mimaki representative if you discover
any problems in the manual.
• We reserve the right to change this manual at any time, without notice.
• If this manual becomes unreadable due to fire or other damage, contact your Mimaki representative to
purchase a new copy.
Accessories
The accessories differ according to the type of head and the target application.
Confirm the accessories supplied against the separate “ACCESSORIES”.
Contact your Mimaki representative immediately if anything is broken or missing.
Reproduction of this manual is strictly prohibited.
© MIMAKI ENGINEERING CO., LTD
All Rights Reserved.Copyright
• This unit uses sharp blades. It can be extremely dangerous during operation. Never put your face or
hands near the machine head. This can lead to severe cuts to your fingers or other body parts.