MIMAKI CF3-1610, Руководство по эксплуатации

Страница: 82 / 166

2-26
Checking the Status Between Tools
Make a test cut to check the status between the tools (pen and tangential cutter or pen and crease roller).
Check Method
Draw the pattern with the pen. Then make a test cut at the same position using the tangential cutter or crease
roller to check the status between tools.
Appropriate remedies are described below for ten types of sample.
• Some samples require the adjustment of one item, while others require the
adjustment of multiple items. Refer to the sample to identify the items requiring
adjustment.
• The description below refers to the pen and tangential cutter. For the crease roller,
read "tangential cutter" as "crease roller."
Overview
The tangential cutter is displaced with respect to the center of the pen,
regardless of the direction of movement.
Remedy
Adjust the Offset in Adjust Cutter in tool adjustments. ( P.6-3)
Overview
The cut is rotated clockwise or counterclockwise.
Remedy
Conduct Adjust
θ
in Adjust Cutter in tool adjustments. ( P.6-3)
Overview
Cutting start point is too far forward or backward.
Remedy1
Adjust the F OFFSET value in the cutting conditions. ( P.2-12)
Remedy2
Adjust Pattern A in Adjust Eccentricity in Adjust Cutter in tool
adjustments. (
P.6-3)
Sample A
Sample B
Sample C