MIMAKI CF3-1610, Руководство по эксплуатации

Страница: 56 / 166

1-42
Setting the Vacuum
Sets the vacuum operation when the optional blower is used.
Enabling / Disabling the Vacuum Automatic OFF Function
1
Display the third page of the local menu.
• Press several times.
2
Press and select
[MODE SET].
3
Press and select [VACUUM].
4
Select [AUTO OFF] or [REV DRIVE].
AUTO OFF setting : Press to select the set value .
REV DRIVE setting : Press to select the set value.
5
Press .
• The settings are saved.
• Press
if you do not want to save the settings.
Item Set value
AUTO OFF
*1
*1. The vacuum cannot turn off automatically if automatic head retraction is OFF.
ON
If automatic head retraction is set to 1 s or 3 s, the vacuum turns off
automatically after head retraction.
OFF Vacuum remains on after head retraction.
REV. DRIVE
ON Press to select the blower operation (adhesion, release).
OFF Press to start vacuum adhesion.
• The optional blower is required to use the vacuum functions.
• Regardless of the automatic head retraction setting, the vacuum automatically turns off after using the
copy function, multi-pass function, or continuous register mark cutting.
[ LOCA L ] 3 / 5
I NT ERF ACE - - - >
MODE SE T - - - >
SE L F T EST - - - >
<MODE SET > 1 / 7
Z S TROKE 7mm>
MUL T I - PASS - - - >
VACUUM - - - >
< VACUUM>
AUTO OF F OF F >
REV DR I VE OF F >