MIMAKI CF3-1610, Руководство по эксплуатации

Страница: 122 / 166

4-12
Continuous Cutting of Register Marks
The FineCut cutting software permits continuous cutting of workpieces with only one set of register mark data
printed.
1
Make the FineCut settings
and start plotting.
(1) Select the single mode.
(2) Set the number of continuous cuts.
(3) Select the number of register marks to detect.
• For details, see the FineCut Operation Manual.
2
When cutting of the first workpiece is
complete, replace the workpiece and
press .
• Press to cancel continuous cutting.
3
Detect the register marks. ( P.4-10)
• Copying starts when register mark detection is
complete.
• Repeat Step 2 and Step 3 for the designated number of
cuts.
4
When the designated number of workpieces has been cut, the head
automatically retracts and the system reverts to local mode.
• When data remains in the receive buffer, the remaining data will also be cut. Be sure to carry out the
Data Clear operation before performing continuous cutting.
P.2-34"Interrupting Processing (Data Clear)"
[ REMOT E ]
E x c h a n g e SHEE T
VAC : Re s ume
CE : A b o r t
[ REMOT E ]
S e t L ED P o i n t e r
SPEED
AUTO>
H e a dMo v e t o L R - >
[ REMOT E ]
* A u t o C o p y Mo d e *
2 / 3
SK I P 0
[ LOCA L ] 1 / 5
TOOL SE L ECT - - - >
COND I T I ON - - - >
T ES T CUT - - - >