MIMAKI CF3-1610, Руководство по эксплуатации

Страница: 160 / 166

6-26
Making a PARAMETER DUMP
1
Use the Tool Select function to set the tool to pen. ( P.2-8)
2
Position A3 or larger paper in landscape direction, using the origin
position mark as the reference.
3
Display the third page of the local menu.
• Press several times.
4
Press and select
[SELF TEST].
5
Press to display the fifth page of
the SELF TEST menu.
6
Press and select
[PARAMETER DUMP].
7
Press .
• The tool moves to the upper-left corner of the paper.
8
Check the paper position.
• Check that the pen tip is at the upper-left corner of the paper.
• If the pen tip is not located at the upper-left corner of the paper, align the upper-left corner of the
paper with the pen.
• A PARAMETER DUMP is not possible for Model M.
• The parameter dump requires a pen and A3 or larger paper.
• If paper smaller than A3 is used, the drawing may extend outside the paper.
• When parameter dump is set, the tool automatically changes to pen. Ensure that a pen is mounted in
Unit A.
[ LOCA L ] 3 / 5
I NT ERF ACE - - - >
MODE SE T - - - >
SE L F T EST - - - >
< SE L F T ES T > 1 / 5
PAT T ERN CUT 1 - - - >
PAT T ERN CUT 2 - - - >
DAT A DUMP
- - - >
< SE L F T ES T > 5 / 5
PARAME T ER DUMP - >
RESERVE
- - - >
RESERVE - - - >
< PARAM DUMP > 1 / 1
END KEY t o S T ART
CE KEY t o CANCE L
< PARAME TER DUMP >
A 3 LOCA CONF I R >
* UPPER L E F T SE T
* MARG I N 1 0 * 1 0mm